XinHongJi Pump logo
 
 
 
  ->>Pump
 CHLF Horizontal Multistage Centrifugal Pumps
 CDL Vertical Multistage Centrifugal Pumps
 CDL SERIES
 WWG Booster Water Supply System
 CDL-A
 PB Mini Circulation Pumps
 TG Circulation Pumps
 IDL Immersion Multistage Centrifugal Pumps
 IS,E Industrial Standardize Centrifugal Pumps
 4GS Submersible Pumps
 4SR Submersible Pumps
 6SR Submersible Pumps
 4GR SUBMERSIBLE PUMPS
 4TS SUBMERSIBLE PUMPS
 TR (7
 QG Screw Submersible Pumps
 WQD Sewage Submersible Pumps
 WQ Sewage Submersible Pumps
 QDX Submersible Pumps Series
 M/80 Self-Priming Centrifugal Pumps
 JETL/S Self-Priming Centrifugal Pumps
 JCP Self-Priming Centrifugal Pumps
 JSW Self-Priming Centrifugal Pumps
 SPP GARDEN SUBMERSIBLE PUMPS
 JDP Deep Wells Centrifugal Pump
 QB End-Suction Peripheral Pumps
 KF/O End-Suction Peripheral Pumps
 KF/1 End-Suction Peripheral Pumps
 PMA End-Suction Peripheral Pumps
 MHF Centrifugal Pump Series
 CPM Centrifugal Pump Series
 SCM Centrifugal Pump Series
 DK Centrifugal Pump Series
 STP Garden Jet Pump Servies
 Automatic Booster System
 HGIZ Coupled Single Stage End Suction Standardized Pump
  ->>Motor
 MS Series
Your Position: Home > Products > IS,E Industrial Standardize Centrifugal Pumps





 Flow rate up to 6200 l/min(372m3/h)
 Dynamic head up to 112 m(367 feet)
 OPERATING LIMITS
 Suction lift up to 7 m
 Fluid temperature up to + 60?
 Maximum ambient temperature + 40?
 Max operating pressure 15 bar





                          AISI 316 stainless steel motor shaft
                    mechanical seal with different materials
                                                         protection: IP 55
                                                            other voltages
                                                         frequency:60Hz
                       for higher temperature pumped liquids
               fou use in areas with a higher temperature
 
 


These pumps are recommended for clean water and fluidswhich are not chemically aggressive to the pump components.
THEY ARE MAINLY USED FOR CIVIL,INDUSTRIAL ANDAGRICULTURAL APPLICATIONS,WHERE THEY MAKETHE MOST OF THEE STURDINESS AND DEPENDABILITY.
They are manufactured to EN 733-DIN 24255 standards.Overall dimensions, sizes and positions of suction and delivery openings, support feet and performance comply with thesestandards.TheE structural shape allows dismantling without disconnecting the pump body from the pipeline (back pull out),making them easy to use in widely varying conditions.
They should be installed in a covered area, protected against weather


the pumps are coupled to an asynchronous , high efficiency XINHONGJI ideuction motor of suitable size, which is quiet,closed and externally ventilated, suitable for continuous duty
INSULATTON class B.
Motors require an adequate esternal motor protector ,and connections are to be according to current standards.

PROTECTION
IP44.

 


















PUMP BODY: cast iron, manufactured to EN 733-DIN 24255 and UNI 7467-DF E-44-111 standards,built with flanged suction and delivery openings(UNI 2236 Pn10).

PUMP BODY COVER: Cast iron which closes the rear pump body and houses the mechanical seal.

IMPELLER: Cast iron

MOTOR SHAFT: AISI 304 stainless steel.

MECHANICAL SEAL: ceramic and graphite.

See more Specifications
Copyright © 2007-2008 XinHongJi Pump Co.,Ltd. All Rights Reserved.
Main Products: Pumps, Water Pumps, Motor
| Web Design & Optimize: zowee.cn