  |
|
 IDL is used for conveying cooling liquid,lubricating liquid and condensation water of machine tools, industrial cleaning equipment or other cases that application of immerged pump is suitable, and is applicable to various temperature, flow and pressure ranges. IDL is applicable to low-corrosive liquid. • Concretely, it is applicable to electric spark, lathe, grinding machine, processing centre, cooling devices, industrial cleaning equipment, filtering system etc.

•Thin, clean non-explosive liquid with without solid grains and fibres; can be used for conveying of water, cooling water solution and cutting lubricating liquid. •Liquid temperature: Normal temperature type:-15℃~+70℃ Warm water type:+70℃~120℃
IDL is non-self priming multi-stage centrifugal pump install withsta Standard motor.The motor shaft is directly connected with the pump shaft through coupling.According to the requirement, the pump can be equipped with intelligent protector, which effectively protects Pumpfrom dry rotation,phase lack, overload etc. In order to meet the requirement of installation depth of the water tank or vessel, it is possible to install cavity body for changing length of the pump. Length for different number of stages is shown in the dimensions & weight table and the table of products supplying scope.
|
 |
|
 •The motor is fully-sealed,air-cooling standard motor 2poles •protection class:IP55 •Insulation class :F •Standard voltage,50Hz: 1x220-230/240v 3x200/346v 3x220-240/380-415v 3x220-255/380-440v •Standard voltage,60Hz: 3x220-230/346-440v 3x220-255/380-440v 3x220-277/380-480v Motors for other voltages can be supplied according to the requirement. Single phase motors with 0.37~2.2KW are available.
 When the pump operates under ambient temperature higher than 40℃ or under altitude higher than 1000m.Because of low air density and poor cooling effects, the motor output power P2 will be decreased to certain extent. If the pump is operated under the above-saidcondi- tions, it should be equipped with motor of higher power. |